Menu Path
Top menu: Walls > Apply Wall Materials > Generate Wall Panels
Right menu: Walls > Generate
š§¾ What it does
The Generate Wall Panels command creates individual cladding panels on wall surfaces using your selected panel material. The panels are positioned automatically according to the operator-defined lay direction (the orientation pattern for panel placement) and account for all door and window openings. The openings must be added before the panels are applied.
š§ How to use it
Ensure you have walls created in your model
Select or assign a panel material to your walls (if not already done, you'll be prompted to select one)
Run the Walls > Generate Wall Panels command
The system automatically places panels on each wall plane according to the lay direction settings (set in Allowances)
š Panel placement behaviour
When panels are generated:
Each wall plane receives individual panels based on the selected material dimensions
Panel placement follows the operator-defined lay direction (horizontal or vertical orientation)
All openings (doors, windows, etc.) are automatically accounted for in the panel layout when added
Panels are cut and fitted around openings as needed
ā
After generating panels, you'll see the placement of both horizontal and vertical cladding panels positioned on your wall surfaces. The lay direction may be changed after the initial installation - use the Walls > Modify Cladding/Siding options.
š” Tips
Set up your panel materials and lay direction preferences before generating panels for best results
Review wall openings before generating panels to ensure accurate panel cutting
You can regenerate panels if you change materials or modify wall geometry
ā