When you click Drawings, you can now print up to 8 different standard CAD drawings or any number of drawings saved as Microsoft Word or Excel Templates.
Refer to the process description for creating these at the end of this section of the manual.
The Select Drawings to print dialog box is displayed from which you select the drawings you want.
Drawing Name | Template Name | Intended Use |
Roof drawing | Drawing-Roof | Shows the roof |
Batten drawing | Drawing-Batten | Shows the battens on the roof |
Block layout | Drawing-block | Shows the blocks on the roof as created by Auto-Block |
Off-cut layout | Drawing-off-cut | Shows the cuts and off-cuts created by Gen-Off-cuts |
Off-cut layout(Colour) | Drawing-Off-cut-Colour | Shows a colour coded printout of the Off-cut Layout |
Panel layout | Drawing-sheet | Shows the sheets on the roof as created by Gen-Sheets |
Panel sequence | Drawing-Sheet-Sequence | Shows the sequencing of panel cutting derived from Linear Nesting |
Panel cutting details | Drawing-Sheet-Cutting | Shows the detailed dimensioned panels |
Flashing drawing | Drawing-flashing | Shows the roof and dimensions for each roof line as detailed by Dimension-Roof Lengths |
Flashing profiles | Drawing-Flashing-profiles | Details the workshop drawings for the fabrication of custom flashings. The standard template has four profiles displayed with the following fabrication details for each new profile, and the cutting list of required lengths for the job. A new page is automatically created for each new group of up to four profiles.  |
Single-Ply Layout | A4-Form | Shows the membrane layout generated by Cover > Select-Membrane > Layout-SinglePly |
Wall Plan | Drawing-Wall-Plan | Shows a plan view of your wall outline |
Wall Elevations | Drawing-Wall-Elevation | Shows you the elevations of each wall outline |
Arc Roof Production Drgs | Found under Cranking.DAB | Details the workshop drawings for the fabrication of curved roofing |
3D Design Drawing | Drawing-3D | Shows the roof in a 3D view |
Scaled Ruler | No template | Creates a scaled ruler with any odd-ball scale which allows random measurements to be taken from a copy of a plan. |
Once you click [OK], the particular drawings you want to print are first prepared for printing and then sent to your printer.