Menu path
Mod-Roof > Change-Pitch
What this command does
The Change Pitch command allows you to modify the pitch of one or more roof planes within an existing roof model.
When applied, Roof Wizard:
Updates the pitch of the selected planes
Recalculates the affected geometry
Maintains connections to adjacent planes where possible
How to use Change Pitch
Select Mod-Roof > Change-Pitch.
Select one or more roof planes you want to modify.
When finished selecting planes, right-click to confirm the selection.
Enter the new pitch value when prompted.
The selected planes are recalculated using the new pitch.
Selecting roof planes
You can select roof planes in either of the following ways:
Turn on roof planes via Tools > Show/Hide-Planes, then click directly on the plane(s) you want to change
OR
Click the tick mark shown in the corner of each roof plane
Both methods allow multiple planes to be selected in a single operation.
Important usage notes
This command is intended for small pitch adjustments.
Large pitch changes may cause adjacent planes to update in unexpected ways, as the software will still attempt to make the geometry fit.
If major pitch changes are required, additional roof modification commands may be needed to achieve the desired result.
Summary
Use Change Pitch to adjust the pitch of one or more roof planes without rebuilding the roof. Select the planes, enter a new pitch, and Roof Wizard recalculates the geometry automatically.